Manual of MEG101AE-R2 and MEG101RAE-R2
http://www.black-box.eu
_____________________________________________________________________________________________
______________________________________________________________________________
Connecting the Modem
The Modem has one Ethernet port which supports connections to Ethernet
devices like NICs, Switches, bridges or routers. You can also connect to another
MEG101AE-R2´s Ethernet port for daisy chaining.
The RJ11 Line port is used to connect to the “other side” through your telephony
wall socket (outlet). For making connectings you can alternatively use
Patchpanels or anything else (like terminal strips). You just need to be sure that
you have a good electrical connection. So keep in mind that using stranded wires
for use in Krone strips is not ideal.
Please note that connections are only operable between Transmitter and
Receiver or between the switch (MEG801AE-R2) and a Receiver. Connecting
two Transmitters or two Receivers by the Line Port will not work.
The RJ11 Phone port of the Transmitter can be connected to a PBX (ab) or your
incoming 2-wire ISDN connection. The RJ11 Phone port of the Receiver can be
connected to an analogue telephone, an analogue Modem or your NTBA.
