11
CHAPTER 3: Configuration
3. Configuration
The Sync SHM-NPR MP has seven configuration
switches, which allow selection of carrier control
method, clocking method, RTS/CTS delay, and data
rate. This section describes switch locations and
explains all possible switch configurations.
3.1 Switch Locations
For your convenience, all configuration switches are
located on a SIP (single in-line package) mounted on
the PC board.
Figure 3-1
shows the location of the SIP
on the board. For instructions on opening the SHM-
NPR case, see
Section 4.1.2
.
Figure 3-1. Switch Locations.
Control
Switches
Surge
Suppressors
(1030S only)
Terminal
Block
Patton
VLSI chip
Isolating
Transformers
