18
LIMITED-DISTANCE MODEM 56/64
3. Connect the 4-wire dedicated line to the modem
line connector.
• If you’re using the terminal block, connect each
lead of the 4-wire dedicated line to the
appropriate screw connector on the terminal
block.
• If you’re using the RJ-11 or RJ-45 connector, plug
the cable into the RJ jack.
• Verify that the connection between the local
modem and the remote modem is as follows:
- Local XMT connected to remote RCV
- Local RCV connected to remote XMT
NOTE
When operating in a noisy environment, we recommend
that you use shielded cables, and connect the cable shield
to “Ground.” Ground is provided on the line connector
(terminal block or RJ-11/RJ-45 connectors) for this purpose.
If you’re connecting to the RJ-11 and RJ-45 jack, refer to
Figures 3-2
and
3-3
for connector pinouts.
