14
SHM-768K
3. Installation
3.1 General
This chapter provides instructions for mechanical and electrical installation
of the SHM-768K stand-alone model. (Refer to
Chapter 6
for rack installation
instructions.) After completing installation, refer to
Chapter 4
for operating
information and system checkout to assure normal operation.
3.2 Site Preparation
Install the SHM-768K within 5 feet (1.5 m) of an easily accessible grounded
AC outlet. The outlet should be capable of furnishing 115 VAC or 230 VAC
(depending on rated voltage of unit).
Allow at least 36 inches (90 cm) of frontal clearance for operating and
maintenance accessibility. Allow at least 4 inches (10 cm) clearance at the rear
of the unit for signal lines and interface cables.
3.3 Mechanical Assembly
The SHM-768K is designed for tabletop or bench installation, and is delivered
completely assembled. No provisions are made for bolting the SHM-768K to
the tabletop.
3.4 Electrical Installation
3.4.1 P
OWER
C
ONNECTION
AC power is supplied to the SHM-768K through a 5-ft. (1.5-m) permanently
attached power cable. The power cable is located on the rear panel and is
terminated by a standard 3-prong plug. (Refer to Figure 3-1.)
