ME1791A-F, ME1794A-F
4 Installation
4. Installation
Installation of the modems is simple and straightforward, just follow these steps:
1. Connect the 4-wire dedicated line to the line connector; transmit pair to
‘XMT’ and receive pair to ‘RCV’.
Observe the following pin polarity between the local and remote units:
Local XMT+ connected to remote RCV+
Local XMT- connected to remote RCV-
Local RCV+ connected to remote XMT+
Local RCV- connected to remote XMT-.
2. Connect the modems directly to the 9-pin connector of the DTE or the
computer and fasten with the two screws – one on each side of the modem
connector.
Summary of Contents for ME1791A-F
Page 2: ......
