60
2-WIRE IDSL LINE DRIVER RACK CARDS
E.4 Installing the Rear Interface Card and the Front Function Card
See
Section 4.2
.
E.5 Connecting to the 10BASE-T Ethernet Port
The 10BASE-T Ethernet Rear Card module provides line side connections through
an RJ-45 connector. Figure E-3 shows the rear panel and the locations of the
connectors.
Figure E-3. Rear-panel RJ-45 connectors.
The RJ-45 Ethernet port on the rear card connects directly to a 10BASE-T network.
Figure E-4 shows the 10BASE-T RJ-45 port pin description. You may make
connections up to 330 feet (100 m) using Type 4 or 5 cable.
RJ-45
Line Side
10BASE-T
Connector
