19
CHAPTER 3: Configuration
C
ONFIGURE THE
L
OCAL
2-W
IRE
IDSL L
INE
D
RIVER
C
ARD
To configure the local Card, make a selection from the following Main Menu.
Figure 3-4. Main Menu.
Main Menu Option 1: Display Active Configuration
Select Option 1 to display the most-recent configuration of the local 2-Wire IDSL
Line (see Figure 3-5). The Card uses the active configuration for its operation. If
you make changes to the configuration, you must select Main Menu Option 8. This
will update the unit to the new active configuration.
Figure 3-5. Display active configuration.
QUIKCONNECT IDSL LINE DRIVER
LOCAL CONFIGURATION
MAIN MENU
1. DISPLAY ACTIVE CONFIGURATION
2. DISPLAY HARDWARE CONFIGURATION
3. DISPLAY SOFTWARE CONFIGURATION
4. SETUP SOFTWARE CONFIGURATION
5. SELECT HARDWARE/SOFTWARE CONTROL
6. DISPLAY MODEM STATUS
7. TEST MODES
8. RESTART UNIT
ENTER YOUR SELECTION (1-8)>
