Black Box MD1276A, User Manual

Page: 231 / 289

S Registers
Page 231
ATS66 Remote Access Guard Time
The Remote Access Guard Time is the time delay required immediately before and after entering
a remote access sequence.
If the Remote Access Guard Time is one second and the remote access character has been
defined as * (asterisk), you must maintain silence on the line for one second, then type ****
(four asterisks) in rapid succession, then maintain another one second
’ s silence.
The guard time is in units of 100 milliseconds (1/10th of a second).
Examples
ATS66=20 Set the remote access guard time to two seconds
Default
10
See Also
S Register 67 Remote Access Character
#A command Universal Remote Access
**** command Remote Access Sequence
Range
1-255