14
100BASE-TX TO 100BASE-FX MEDIA CONVERTER TMTR AND RCVR
When the switch is ON, autonegotiation operation
mode is enabled.
When the switch is OFF, autonegotiation operation
mode is disabled. Set the switch to OFF when connec-
ting to an autosensing, not an autonegotiating, switch.
NOTE
An autonegotiating switch automatically detects and adjusts
for 10- or 100-Mbps operation AND full- or half-duplex
operation. An autosensing switch detects and adjusts for
10- or 100-Mbps, but does NOT adjust for full- or half-
duplex operation.
NOTE
If you have any of the following problems, please check to
see if the N-Way switch is properly set.
1.
The Link LED is not lit and the connection cannot be
established.
2.
The Link LED is lit and the connection is OK, but the
converter cannot transmit or receive data.
3.
The converter functions properly for awhile, then it
does not work. If you power off/on the converter, then it
works properly again.
Summary of Contents for LH1709A-SCTS-AU
Page 3: ......
