15
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: WEB MANAGEMENT
As shown in the screen on the previous page, this switch’s setting options can be divided into three main categories:
Configuration: Here you can make system configurations. The settings you can configure here include changing the IP address
of the switch, setting the rate limit of each port, VLAN, IGMP Snooping, and Quality of Service (QoS).
Monitoring: Here you can monitor system status, or perform system diagnostics with VeriPHY and Ping.
Maintenance: This section allows you to reboot your switch, reset settings (except the switch’s IP address) to default values, upload switch
firmware, and download/upload system setting values.
The following sections will discuss all the functions in detail.
5.2 WEB MANAGEMENT — CONFIGURATION
5.2.1 CONFIGURATION — SYSTEM
FIGURE 5-2. SYSTEM CONFIGURATION SCREEN
MAC Address: Displays the unique hardware address assigned by the manufacturer (default).
S/W Version: Displays the switch’s firmware version.
H/W Version: Displays the switch’s hardware version.
Active IP Address: The current active IP address of the switch.
Active Subnet mask: The current active subnet mask of the IP Address.
Active Gateway: The current active gateway of the switch.
DHCP Server: The IP of the DHCP Server. Displays after the DHCP client is enabled.
Lease Time Left: The lease time received from the DHCP server. Displays after the DHCP Client is enabled.
