Page 12
724-746-5500 | blackbox.com
LGB616A
Chapter 3: Configuration and Monitoring
Key in the password and click “OK” to log in.
Password: admin
After logging in, the switch is ready for configuration.
Step 4:
On the home page, select the configuration by clicking the icon:
- Configuration
- Monitoring
- Maintenance
- Logout
3.1 Configuration: System Configuration
Figure 3-3. System Configuration screen.
This will show system status, such as: MAC address, system firmware version, and
other system information.
You can change the user name, the password, and IP address, then click “Apply”
to confirm the new change.
Next, you must reset the switch by turning it off and turning it on to take the new
user name, the password, and IP address.
