Black Box LGB1048A, User Manual

Page: 185 / 279

User Manual
Publication date: Feb., 2008
Revision A1
177
To set acl rule
Argument :
acl : acl number, from 1 to 48
rule : rule number, from 1 to 8
etherType : 1 – ipv4, 2 – arp, 3 – rarp, 4 – user_defined1,
5 – user_defined2, 6 – user_defined3, 7 – unknown, 8 – any
sip_mask : source ip and mask notation, ex: 192.168.1.0-24
Only valid when etherType is ipv4.
dip_mask : destination ip and mask notation, ex: 192.168.2.230-28
Only valid when etherType is ipv4.
ipProtocol : 1 – icmp, 2- igmp, 3 – tcp, 4 – udp, 5 – user_defined,
6 – user-defined2, 7 – user_defined3, 8 – unknown, 9 – any
sport : source tcp/udp port range, ex: 1-1024
Only valid when ipProtocol is tcp/udp.
dport : destination tcp/udp port range, ex: 1-1024.
Only valid when ipProtocol is tcp/udp.
permit : 1 – allow, 0 – deny
priority : 0 – none, else from 1 to 8
Possible value:
acl : 1 to 48
rule : 1 to 8
etherType : 1 to 8
ipProtocol : 1 to 9
sport : 1 to 1024
dport : 1 to 1024.
permit : 0 or 1
priority : 0 to 8
Example:
LGB1048A(acl)# set rule 1 2 3
192.168.1.0-24 192.168.2.230-28 4 5 6 1 7
show
Syntax :
Show <argument>
Description :
To display the configuration of acl.
Argument :
acl-vlan-mapping
mode
rule
Possible value:
None.
Example:
LGB1048A(acl)# show acl-vlan-mapping
1) VID: 1, ACL Number: 1
2) VID: 10, ACL Number: 1
3) VID: 20, ACL Number: 1
4) VID: 30, ACL Number: 1