25
CHAPTER 4: Novell NetWare Configuration and NIMANAGE Utility
4. Novell NetWare Configuration
and NIMANAGE Utility
4.1 Introduction
This chapter is divided into four topics:
•
Section 4.2, Configuration: Before You Begin
, is for users who have a very
large network tied into many different sites. This topic explains how to
set up a primary file server.
•
Section 4.3, Configuration: Using NetWare 2.15 or 3.10 and Later
, lets
you configure the Ethernet Print Server. Use PCONSOLE to set up all
your Ethernet Print Server printers so that users can print.
•
Section 4.4, Configuration: Using NetWare 4.00
, lets you configure the
Ethernet Print Server. Use PCONSOLE to set up all your Ethernet Print
Server printers so that users can print.
•
Section 4.5, Using the NIMANAGE Utility
, describes the PC-based
program that lets you activate network protocols, configure the print
server and printer ports, reset the Ethernet Print Server remotely, and
troubleshoot problems.
•
Section 4.6, Using NetWare Utilities/Making Changes to the Ethernet
Print Server
, explains how to use Novell NetWare utilities with the
Ethernet Print Server.
NOTE
To configure the Ethernet Print Server for Novell NetWare users, you
must follow the steps in Section 4.3 or 4.4 before you print.
4.2 Configuration—Using PCONSOLE: Before You Begin
Ethernet Print Server 4-Port users only: If you have a very large network tied
into many different sites, you should read the following about primary file
servers. If you don’t have such a network, go to the PCONSOLE explanation
for your NetWare version
Section 4.3
or
4.4
).
