10
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 4: CONFIGURATION
4.1 OPTIONS
If the factory-installed configuration needs to be adjusted, you can configure the device by using:
DIP switches (while powered off)
Web Wizards through HTTP access
Command line interface (CLI) through SSH
A combination of the above
For simple and common configurations, you may only need to use the DIP switches.
NOTE: If you will not have physical access to the device, it is best to leave the DIP switches disabled, as they will always override the other
configuration access methods for some settings. This will be problematic if you need to change these settings remotely.
The factory installed configuration is shown below.
context ip ROUTER
interface LAN
ipaddress
192.168.200.10/24
ipaddress DHCP dhcp
context switch-group DEFAULT
bind interface ROUTER LAN
no shutdown
interface ETHERNET _ 0 _ 0
interface ETHERNET _ 0 _ 1
interface ETHERNET _ 0 _ 2
interface ETHERNET _ 0 _ 3
interface DSL _ 0 _ 0
port ethernet 0 0
bind switch-group DEFAULT ETHERNET _ 0 _ 0
no shutdown
port ethernet 0 1
bind switch-group DEFAULT ETHERNET _ 0 _ 1
no shutdown
port ethernet 0 2
bind switch-group DEFAULT ETHERNET _ 0 _ 2
no shutdown
port ethernet 0 3
bind switch-group DEFAULT ETHERNET _ 0 _ 3
no shutdown
port dsl 0 0
service-mode 2-wire mode local
bind switch-group DEFAULT DSL _ 0 _ 0
no shutdown
