27
CHAPTER 4: Operation
4. Operation
The Remote MiniBridge operates completely
automatically. It gets its power from its external power
supply or (optionally, if it’s an AUI model) from the
AUI interface. During normal operation, the unit’s
PWR LED is continuously lit.
On 10BASE-T models, the green LAN LED should be
continuously lit if the 10BASE-T link between the RMB
and the attached device is OK. The RMB’s yellow WAN
and LAN LEDs may blink occasionally or be
continuously lit, depending on the amount of data
traffic. The COLL LED should blink occasionally.
If you ever need to change the settings of the RMB,
move its top-mounted four-position configuration DIP
switch as necessary (refer to
Table 3-1
on page 22).
