4
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 2: OVERVIEW
2.1 INTRODUCTION
The Rackmount Fiber Patch Panel is available in several fiber configurations that support ST, SC, and LC connectors. (See
Figures 2-1 to 2-4.) It provides termination for optical cables on the premises or in a central office.
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
FIGURE 2-1: JPM370A-R2 FRONT PANEL (24 SIMPLEX ST
®
ADAPTERS)
1 2
3 4
5 6
7 8
9 10
11 12
FIGURE 2-2: JPM375A-R2 FRONT PANEL (12 DUPLEX SC ADAPTERS)
1
2
3
4
5
6
7
8
9
10 11 12
FIGURE 2-3: JPM380A-R2 FRONT PANEL (12 DUPLEX LC ADAPTERS)
FIGURE 2-4: JPM385A FRONT PANEL (24 DUPLEX LC ADAPTERS)
The patch panel is constructed of 16 AWG steel housing and is compact and rugged enough for commercial applications.
Its powder coating finish is corrosion resistant.
The patch panel is only one rack unit (1U) high, and you can access the preloaded fiber adapter via a pull-out tray. It’s ideal
for fiber installations where rack space is limited. The patch panel has two openings in the back for cable access and a rear
bar that supports cable ties.
A cable routing spool provides storage for excess cable length.
Your package should include the following items:
(1) Rackmount Fiber Patch Panel
(4) 10/32 cuphead screws
(4) 12/24 cuphead screws
(4) 4-inch (10.2 cm) cable ties
(30) 3-inch (7.6 cm) cable ties
(1) red “danger” sticker that warns you of laser hazard
(6) 1-inch (2.5 cm) stick-on rectangular cable holders
(1) pair of black spool rings for cable management
If anything is missing or damaged, please contact
Black Box at 877-877-2269.
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
