Black Box iPATH ACR1000A-CTL-192 User Manual Download Page 100 | Manualshive

Page: 100 / 101

Black Box iPATH ACR1000A-CTL-192 User Manual Download Page 100

100

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

For use in dry, oil free indoor environments only.

The units and their power supplies generate heat when in operation and will become warm to the touch. Do not enclose

them or place them locations where air cannot circulate to cool the equipment. Do not operate the equipment in ambient
temperatures exceeding 40 degrees Centigrade. Do not place the products in contact with equipment whose surface
temperature exceeds 40 degrees Centigrade.

Warning - live parts contained within power adapter.

No user serviceable parts within power adapter - do not dismantle.

Plug the power adapter into a socket outlet close to the module that it is powering.

Replace the power adapter with a manufacturer approved type only.

Do not use the power adapter if the power adapter case becomes damaged, cracked or broken or if you suspect that it is not

operating properly.

If you use a power extension cord with a unit, make sure the total ampere rating of the devices plugged into the extension cord

does not exceed the cord’s ampere rating. Also, make sure that the total ampere rating of all the devices plugged into the wall
outlet does not exceed the wall outlet’s ampere rating.

Do not attempt to service the units yourself.

APPENDIX I - SAFETY INFORMATION

«
...
98
99
100
101
»

Summary of Contents for iPATH ACR1000A-CTL-192






































































































Reviews:

No comments