3 of 3
TECH SPECS
Distance (Maximum) —
ICD105A, ICD107A: 4000 ft. (1219.2 m);
ICD108A: 50 ft. (15.2 m);
MED101A: 2.5 mi. (4 km)
Operation —
ICD105A: RS-232: Half- or full duplex;
RS-422: Full duplex;
RS-485: 2-wire half-duplex or 4-wire full duplex;
ICD107A: RS-422: Full duplex;
RS-485: 2-wire half-duplex or 4-wire full duplex;
ICD108A: RS-232: Half- or full duplex;
MED101A: RS-232: Half- or full duplex;
RS-422: Full duplex;
RS-485: 2-wire half-duplex or 4-wire full duplex;
Fiber ring: Half-duplex over multimode;
All transmissions are async
Speed —
ICD105A: 1200 bps to 115.2 kbps;
2400 bps to 38.4 kbps, switch-selectable;
ICD107A: 2400 bps to 115.2 kbps, switch-selectable;
other rates available up to 460.8 kbps;
ICD108A: Up to 115.2 kbps;
MED101A: RS-232: Up to 115.2 kbps;
RS-422/RS-485: Up to 460.8 kbps
CE Approval —
Yes
Connectors —
ICD105A: (1) 5-position terminal block, (1) DB9 F (DCE);
ICD107A: (2) 5-position terminal blocks;
ICD108A: (1) DB9 M, (1) DB9 F;
MED101A: (2) 5-position terminal blocks, (1) pair of ST
®
Operating Environment —
Temperature: -40 to +185°F (-40 to +85°C);
Humidity: Up to 95% noncondensing
Power —
+10 to -48 VDC (±20%) or from optional DIN Rail 12-VDC
Power Supply (PSD100)
Size —
ICD105A: 4.9"H x 4.1"W x 1.3"D (12.4 x 10.4 x 3.3 cm);
ICD107A: 3.9"H x 2.9"W x 0.9"D (9.9 x 7.4 x 2.3 cm);
ICD108A: 4.9"H x 4.2"W x 1.3"D (12.4 x 10.7 x 3.3 cm);
MED101A: 4.9"H x 4.5"W x 1.3"D (12.4 x 11.4 x 3.3 cm)
1/22/2007
#26548
724-746-5500
blackbox.com
Item
Code
Industrial RS-232
↔
RS-422/RS-485 DIN Rail Converter
ICD105A
Industrial RS-422/RS-485 DIN Rail Repeater
ICD107A
Industrial RS-232 DIN Rail Repeater
ICD108A
Industrial DIN Rail RS-232/RS-422/RS-485
↔
Fiber Driver
MED101A
For DB9 male/female connections, order…
DB9 Male/Female Cable, 6-ft. (1.8-m)
BC00200
For RS-422 and RS-485 interfaces, order…
Individually Shielded Low-Capacitance Cable — Extra Distance,
PVC Jacket, 4 Conductors (2 Pairs), 2000-ft. (609.6-m)
ERN04A-2000
You may also need…
DIN Rail, 1-m (3.2-ft.)
DR100
DIN Rail DB25 to Terminal Block Adapter
IC980
DIN Rail RS-422/RS-485 Data-Line Surge Protector
SPD001A
To power six converters or repeaters — or four fiber drivers —
order…
DIN Rail 12-VDC Power Supply
PSD100
DIN rail is an industry-standard metal rail, usually installed
inside an electrical enclosure, which serves as a mount for small
electrical devices specially designed for use with DIN rails.
These devices snap right onto the rails, sometimes requiring
a set screw, and are then wired together.
DIN rails are a space-saving way to accommodate com-
ponents. And because DIN rail devices are so easy to install,
replace, maintain, and inspect, this is an exceptionally conven-
ient system that has become very popular in recent years.
A standard DIN rail is 35 mm wide with raised-lip edges,
its dimensions outlined by the Deutsche Institut für Normung,
a German standardization body. Rails are generally available
in aluminum or steel and may be cut for installation.
Depending on the requirements of the mounted components,
the rail may need to be grounded.
Technically Speaking
ICD105A
