8
MINI INTERFACE CONVERTERS
4) Note that the Converter connects only the data
signals. Some of the V.24 control signals are
pre-set depending on the DTE/DCE switch.
5) To close the Converter, simply press the two
halves of the cover together.
6) Connect the Converter directly to the 25-pin
connector of the terminal or computer port,
and fasten with the two screws—one on each
side of the Converter.
IC951A
For converting between RS-449/422 (V.36/V.11)
and X.21 interfaces. The Converter is used for
connecting a V.36 DCE to an X.21 DTE, and has a
built-in buffer to accommodate phase differences
between the receive and transmit clocks of the
DCE. Once the connectors are plugged into the
DTE and DCE, connect the DC jack to the DC
socket on the side of the Converter and insert the
wall-mount transformer into the AC mains. Note
that an internal elastic buffer is provided to solve
clock phase problems. This Converter requires an
external power supply.
Summary of Contents for IC951A
Page 21: ...NOTES ...
