5
CHAPTER 1: Specifications
1. Specifications
Cable Required:
Between local and remote units: Duplex 62.5/125-µm
multimode, 50/125-µm multimode, or 9/125-µm single-
mode fiberoptic cable terminated with MT-RJ male
connectors;
Between local unit and attached USB host: USB Type A to
Type B cable (a 2-m/6.5-ft. cable is included);
Between remote unit and attached USB devices: Devices with
hardwired Type A cords plug directly into the remote unit;
otherwise, you’ll need a USB Type A to Type B cable (not
included) for each device
Compliance:
CE (EN 55022 Class A, EN 55024, EN 61003-2, EN 61003-3);
FCC Class A, IC Class/classe A;
USB-IF
Transmission:
Transparent to users (automatic, no delay)
USB Data Rate:
1.5 or 12 Mbps (passed through) depending on transmission
speeds of attached devices
Maximum
Distance:
500 m (1640 ft.) of multimode or single-mode cable between
local and remote units
Indicators:
LEDs on local unit:
Front-mounted: (1) for unit power, (1) for host
communication;
Rear-mounted: (1) for fiber link;
On remote unit:
Front-mounted: (1) for unit power, (4) for device
communication;
Rear-mounted: (1) for fiber link
Connectors:
On local unit:
Front-mounted: (1) USB Type B female, (1) 2.1-mm
center-positive barrel jack for power;
Rear-mounted: (1) MT-RJ female;
On remote unit:
Front-mounted: (4) USB Type A female, (1) 2.1-mm
center-positive barrel jack for power;
Rear-mounted: (1) MT-RJ female
Summary of Contents for IC243A
Page 19: ...NOTES ...
