11
CHAPTER 3: Installation
NOTE
If the Wizard does not appear when you plug in the
serial converter, view the section “Is USB correctly
installed?” in the README.TXT file on the USB Solo
driver diskette.
3. A COM-port number will then be automatically
assigned as described in Section 4.1. If you need to
make any changes to the assigned COM port, refer
to Section 4.2.
4. Configure your application program to use the
new COM port specified.
5. Plug your legacy serial device into the serial
converter.
NOTE
Although USB devices are “hot plug” capable, RS-232C
devices are not. Always power off the serial device
before either plugging the USB Solo into a USB port or
hub or unplugging it.
Summary of Contents for IC138A-R2
Page 19: ...NOTES ...
