11
CHAPTER 3: Installation
3. Installation
3.1 Hardware Installation
1. Plug the audio headset microphone and speaker
connectors (3.5-mm phone connectors) into the
appropriately marked jacks on the USB adapter
case. Individual multimedia microphones and
speakers may be connected in place of a headset,
if desired.
2. Connect the USB Headset Adapter to your
computer’s USB port. (It makes no difference
whether you do this before or after the computer
is powered up.) Once it is connected, the Window
Wizard will detect the device and automatically
launch the software driver.
NOTE
You will not need a CD or floppy disk during the installation.
Simply follow the simple step-by-step instructions.
