background image

29

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

4.1.6 USER ACCOUNTS
4.1.6.1 TO DISPLAY THE USER ACCOUNTS PAGE

1  Access the Zero Touch Switch Manager.
2  On the left side, click the Configuration button.
3  On the left side, click the User accounts option. See Figure 4-5.

Figure 4-5. The User accounts page 

4.1.6.2 MANAGING USERS

The maximum number of declared users is limited to an administrator and up to four other users. A list of current users will be 
shown and you can alter the list as follows:

TO EDIT A USER

1  Click on the user name.
2  Click the Edit user button.
3  Adjust the 

Username

 and/or 

Password

 as required.

 

Note: The admin username cannot be changed.

4  Click the Save button.

TO ADD A USER

1  Click the Add user button.
2  Enter the required 

Username

 and/or 

Password

.

3  Click the Save button.

To delete a user

1  Click on the user name.
2  Click the Edit user button.
3  Click the Delete user button.
 

Note: The admin user cannot be deleted.

4  Click the Save button.

Summary of Contents for Freedom II KV0004A-LED





















































Reviews: