56
FIBER METER
Figure 5-15. Autotest Two-Way RX Loss screen.
NOTE
Test result TX designates measurements made on the fiber
connected to the TX port of the Main Unit during the first
part of the Autotest. Test result RX designates
measurements made on the fiber connected to the RX port
of the Main Unit during the first part of the Autotest.
5.6 Changing The Cable Test Standard
You can select or change the cable test standard that the
Fiber Meter uses for Autotest pass-fail determinations.
The currently selected cable test standard is displayed
on the Autotest Optical Power, Auto Test Summary,
Autotest Loss, and Autotest Margin display screens. You
can change the cable test standard from any of these
display screens using the following procedure:
1. Press the up- and down-arrow keys on the Main
Unit to display the
CABLE TEST STANDARD
LIBRARY
.
Summary of Contents for Fiber Meter
Page 3: ......
