background image

724-746-5500   |   blackbox.com 

Page 4

EC24U3032

Preface/Safety Information

Preface

This manual is provided to prevent service personnel from committing an act that results in the risk of fire, electric shock, or injury 
to persons. Only trained service personnel should receive, unpack, and assemble the Elite Wallmount Cabinet. In addition, only 
trained service personnel should install equipment in enclosures.

Safety

Safety Symbols Used in this Manual 

This manual provides general safety guidelines to be observed during installation, operation, and maintenance of the Elite 
Wallmount Cabinet. 

WARNING:  Failure to follow directions in the warning could result in injury to persons or loss of life.

CAUTION:  Failure to follow directions in the caution could result in damage to equipment or storage data.

Safety Considerations

WARNING:  Improper handling and use of the Elite Wallmount Cabinet could result in equipment damage, serious injury,  

or possible death.

Only trained service personnel should be used to remove the enclosure from the pallet. Also be sure you have a sufficient number 
of service personnel. Do not attempt to move enclosures by yourself.

Only UL

®

 Listed ITE units should be installed inside the Elite Wallmount Cabinet.

Be sure to read and follow all individual manufacturer equipment manuals for safety and installation instructions.

The Elite Wallmount Cabinet was not evaluated as a fire enclosure.

Proper spacing is required when installing electrical equipment to avoid electrical shock.

The ambient temperature operating range for the Elite Walllmount Cabinet and accessories is +50 to +95° F (+10 to +35° C).

The non-operating temperature is -4 to +140° F (-20 to +60° C).

Summary of Contents for EWM12U242418-R2

















Reviews: