Page 21
724-746-5500 | blackbox.com
ACX048 API manual
Chapter 5: Configuration
5. Configuration
5.1 General Remarks
The DKM FX API provides all commands that are necessary to switch the DKM FX
matrix.
5.2 DKM FX Configuration
To operate the DKM FX or DKM FX Compact matrix, it has to be configured
appropriately. In the following section, all relevant chapters from the DKM FX and
DKM FX Compact manual (main manual) are described. For a detailed
explanation, refer to the the main manual.
5.2.1 System Data
The DKM FX API relevant system configuration is set in this menu.
You can access the menu via OSD or Java:
Figure 5-1. OSD and Java icons.
You can select between the following DKM FX API relevant settings:
Table 5-1. API relevant settings.
Field
Selection
Description
Enable
COM
Echo
activated
Send all performed switching commands in the matrix as an echo via serial
interface.
deactivated
Function not active (default).
Enable
LAN Echo
activated
Send all performed switching commands in the matrix as an echo via LAN
interface.
NOTE: This function should be enabled when using a media control via TCP/
IP connection.
deactivated
Function not active (default).
