16
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1.877.877.2269
BLACKBOX.COM
CHAPTER 6: RS-232 CONTROL
FIGURE 6-2. COM PORT NUMBER
Run the terminal client of your choice ,such as HyperTerminal or PuTTY. Select the correct COM port on the
computer. Use the following connection settings: 115200, N, 8, 1, no flow control.
Cycling power on your unit will display a boot up message in your terminal software if the connection is correct.
NOTE: Your terminal software may not default to or display all of the settings above. If you attempt to connect and
the settings above are not set correctly, after you adjust the settings you may need to cycle power on your unit for
communication to be established.
See Table 5-1 for a list of RS‐232 commands.
