14
HS RS-232
↔
CURRENT LOOP CONVERTER ACTIVE
10.
Bend the top half of the case as necessary to place it over the strain-relief
assembly. Do not snap the case together yet.
11.
Insert one captive screw through a saddle washer, then insert the captive
screw with the washer on it through the hole in the DB25 end of the case.
Snap that side of the case closed. Repeat the process for the other side. Cable
installation is complete.
4.1.2 T
WISTED
-P
AIR
C
ONNECTION
U
SING
M
ODULAR
J
ACKS
The modular versions of the HS RS-232
↔
Current Loop Converter Active
have an RJ-11 (CL091A-F, CL091A-M, CL091AE-F, CL091AE-M) or RJ-45
(CL092A-F, CL092A-M, CL092AE-F, CL092AE-M) jack mounted in the case.
These jacks are prewired for a standard telco wiring environment. To be sure
you have the right wiring, use the table below as a guide.
RCV G XMT
