13
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 3: INSTALLATION
Follow the steps below:
1. Connect an HDMI source to the HDMI 1 input connector.
2. Connect an HDMI source to the HDMI 2 input connector.
3. Connect an HDMI source to the HDMI 3 input connector.
4. Connect a DP source to the DP input connector.
5. Connect a VGA video source to the VGA HD15 input connector.
6. Connect an audio source to the audio input connector.
7. Connect the HDMI output connector to an HDMi display device.
8. Connect the DP loopthrough output connector to a DP display device.
9. Connect the audio output connector to the audio amplifier, as required.
10. Connect the 12-V/2-A adapter to the 12-VDC connector.
3.2 RACKMOUNT INSTALLATION
Take the following steps to attach the two brackets to the system chassis and install it into a rack.
1. Remove all cables and power supply before mount the 4K Quad View Presentation Switcher in the rack.
2. Place the system chassis on a sturdy surface.
3. Attach one bracket to the left side of the system chassis by using the screwdriver and four screws.
4. Attach the other bracket to the right side of the system chassis by using the screwdriver and four screws.
5. Use your tape measure and level to ensure that the supporting shelf and the chassis are installed straight and level.
6. Make sure that your path to the rack is unobstructed.
7. Slide the unit into the rack and position using the attached L brackets so that the slots in the brackets are positioned over the
appropriate mounting holes in the side rails of the rack.
8. Securely fasten the unit into the rack by using the four screws that are supplied with the rackmount kit, installing two of the
screws on each side of the unit. Use a screwdriver to tighten the screws on each side of the unit.
