Page 35
724-746-5500 | blackbox.com
Chapter 4: Control Operations
14. EDID management command:. EDIDM[X]B[Y]. Example: “EDIDM5B3.” to enable
input 3 to learn the EDID data of output 5.
15. Command for signal cards: USER/[Y]/[X]*****.
Example: “USER/I/7:0623%;” to set the input 7 to support YPbPr signal, the card is
plugged in the second input slot of the matrix.
NOTE: If there is an empty input card or output card slot, send the command “ALL#.” It
will show the result as 1->1, 2->2, 3->3, but actually there is no input/output sig-
nal at this card.
4.4. TCP/IP Control (Optional)
4.4.1. Control Modes
TCP/IP default settings: IP is 192.168.0.178, Gateway is 192.168.0.1, and Serial Port is
4001. IP and Gateway can be changed as needed; Serial Port cannot be changed.
Controlled by Single PC
Connect a computer to the TP port of the AVS1600, and set its IP address and gateway
to the same IP section as the default IP of the AVS1600 (192.168.0.178).