Page 33
724-746-5500 | blackbox.com
Chapter 4: Control Operations
Table 4-3 (continued). Commands for Signal Cards.
Command
Description
AVS-4I-UNI Card (continued)
USER/I/[x]:0628%;
Set the resolution of input [x] to 1280x800, WXGA
USER/I/[x]:0629%;
Set the resolution of input [x] to 1920x1080, 1080P
USER/I/[x]:0620%;
Set the resolution of input [x] to 1920x1200, WUXGA
USER/I/[x]:0621%;
Set the resolution of input [x] to 1600x1200, UXGA
USER/I/[x]:0698%;
Software update
USER/I/[x]:0686%;
Set the output signal of input [x] to HDMI
USER/I/[x]:0687%
Set the output signal of input [x] to DVI
AVS-4I-HDM/BT
AUDIO[X]I[Z].
Select audio source from audio inputs or AV signal inputs
NOTES:
1. Disconnect all the twisted pairs before sending EDIDUpgrade[X] command.
2. In the above commands, “[”and “]” are symbols for easy reading and do not need to
be typed in actual operation.
3. Remember to end the commands with the ending symbols “.” or “;”.
4. Type the command carefully, it is case-sensitive.
5. Commands pertaining to EDID are only available for signal cards that support EDID
management.
6. AVS1600 features six built-in EDID data channels. The chart below illustrates detailed
information.
Table 4-4. EDID data.
Number
Description
1
1080p 2D 5.1CH
2
1080p 2D 2.0CH
3
720p 2D 5.1CH
4
720p 2D 2.0CH
5
4kx2k 2D 5.1CH
6
4kx2k 2D 2.0CH