Page 20
724-746-5500 | blackbox.com
Chapter 4: Control Modes
4.2.1 Accessing through Serial
1. Using the client, select “serial” and enter “115200” for the speed (baud rate).
Figure 4-1. PuTTY configuration screen using serial.
2. No username or password is required. Just press enter.
Set the COM number, baud rate, data bit, stop bit, and parity bit correctly so you can
send commands in the Command Sending Area of the screen.
NOTE: To control the AVS-HDB-4TX via an RS-232 port, configure the communication
protocol parameters as: Baud rate: 9600; Data bit: 8; Stop bit: 1; Parity bit: none.
