manualshive.com logo in svg

Black Box ACX300-R2, User Manual

Share
Download
Black Box ACX300-R2 User Manual Download Page 2

2

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1.877.877.2269

BLACKBOX.COM

TABLE OF CONTENTS

SAFETY INSTRUCTIONS .................................................................................................................................................................. 4

1. SPECIFICATIONS ........................................................................................................................................................................... 5

2. OVERVIEW ...................................................................................................................................................................................... 6

2.1 Introduction ...............................................................................................................................................................................................6
2.2 Intended Use .............................................................................................................................................................................................6
2.3 What’s Included ........................................................................................................................................................................................6
2.4 Hardware Description ..............................................................................................................................................................................6

  2.4.1 Local Extender ....................................................................................................................................................................................................6
  2.4.2 Remote Extender ...............................................................................................................................................................................................8
  2.4.3 LED Indicators ....................................................................................................................................................................................................9

3. INSTALLATION ............................................................................................................................................................................ 10

3.1 Mounting Options ...................................................................................................................................................................................10

  3.1.1 Mounting Pads and Rubber Feet ...................................................................................................................................................................10
  3.1.2 Mounting KIts (Optional) .................................................................................................................................................................................10

3.2 Installing the Extender ...........................................................................................................................................................................10
3.3 Startup ....................................................................................................................................................................................................12
3.4 Removing a CATx Cable .........................................................................................................................................................................12

 

4. EXTENDER MENU/SETTINGS .................................................................................................................................................... 13

4.1 Access the Main Menu ...........................................................................................................................................................................13
4.2 Status Menu ...........................................................................................................................................................................................13
4.3 Determine the Current Firmware Version ............................................................................................................................................14
4.4 Perform a Firmware Upgrade ................................................................................................................................................................14
4.5 Unlock an Option ....................................................................................................................................................................................14
4.6 Enable or Disable the USB Menu Option ..............................................................................................................................................16
4.7 Define What DDC Information is Used by the PC ................................................................................................................................17
4.8 Change the Network Settings ...............................................................................................................................................................17
4.9 Change the Extender Settings ..............................................................................................................................................................18

  4.9.1 Enable or Disable the USB Compatibility Mode .........................................................................................................................................19
  4.9.2 Show the Last Received Image .....................................................................................................................................................................20
  4.9.3 Turn ON or OFF Monitor Synchronization ...................................................................................................................................................21
  4.9.4 Lock the Main Menu ........................................................................................................................................................................................21
  4.9.5 Use the Power Saving Mode ..........................................................................................................................................................................22
  4.9.6 Select Your Type of Keyboard ........................................................................................................................................................................23
  4.9.7 Change the Keyboard Fallback Mode ..........................................................................................................................................................23
  4.9.8 Change Keyboard Shortcuts ..........................................................................................................................................................................24
  4.9.9 Close the Extender Settings Menu ...............................................................................................................................................................25

4.10  Switch Between Different Computers ...............................................................................................................................................25
4.11 Share Videos .........................................................................................................................................................................................25

Summary of Contents for ACX300-R2





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands