Operation
2011-10-04
19
6 Operation
6.1
Switching a Source
6.1.1 Switching
via
Keyboard
From your console, you can switch via keyboard sequence between
different monitors.
1. Open Command Mode with the 'Hot Key' (see Chapter 5.1, Page 17).
2. Enter the number of the specific source or monitor and confirm with
<Enter>.
At the same time Command Mode is closed and the keyboard LEDs
return to previous status.
Keyboard and mouse are connected to the specified source or
monitor.
6.1.2 External
Switching
(optional)
Optionally, you can connect a button with a RJ10 interface to switch to the
respective source or monitor.
The RJ10 interface is separately available for each USB-HID port with
CPU connection.
