Black Box ACUREMSW, User Manual

Page: 12 / 58

QUICK SETUP
10
1. Quick Setup
This section briefly describes how to install your KVM extender system and optimize the
video signals. Unless you are an experienced user, we recommend that you follow the full
procedures described in the rest of this manual.
.
Install system
1. Connect Remote Unit to KVM and audio/serial devices
(if present).
2. Connect Local Unit or Extender Hub to CPU.
3. Connect Remote and Local Units with compatible
CAT5/5e Interconnect cable.
4. Power up system.
Any Problems? See
Installation and
Troubleshooting
sections.
View Test Card
ftp://ftp.blackbox.com/connectivity/ServSwitch/
Set Cable Length Jumpers
Remove Remote Unit cover and set all three jumpers to position
for Interconnect cable length (see page 19)
Adjust EQ and Peak controls
Optimize video quality on Remote console monitor
Provides useful
image for adjusting
video.