SERVSWITCH™ BRAND MINI KVM EXTENDER
14
5. Installation
Installing the ServSwitch Brand Mini KVM Extender is a very easy plug-and-
play process. For the PC, PS/2 and USB models simply connect the HD15M
connector on the transmitter to the HD15F video out connector on the PC.
Connect the PS/2 or USB keyboard and mouse transmitter cables to the
corresponding connector ports on the PC. Connect the receiver directly to
the keyboard, monitor, and mouse cables used for the KVM station. Using a
PS/2 keyboard and PS/2 mouse will require a “Y” cable to connect to the
receiver unit’s single PS/2 port. Connect the power adapter to the receiver
unit’s power port. Finally, connect the transmitter’s RJ45 connector to the
receiver’s RJ45 connector using up to 300 feet of CATx cable.
5.1 Powering Up the System
It is important to initially apply power, in this order; KVM monitor, the
receiver unit, and last, boot the PC. The monitor connected to the receiver
unit must be on before power is applied to the receiver for the proper DDC
table information to be read from the attached monitor. When the PC is
booted, the KVM monitor will display a clear, clean image of the boot
sequence.
Summary of Contents for ACU7017A
Page 1: ......
Page 24: ...NOTES 23...
