SERVICE
SETUP
27
4. Service
Setup
For most applications, you shouldn't need not to make any adjustments to set up your DVI-D
CATx/Fiber- Extender. Under some special circumstances it could be necessary to setup
configuration specials.
For some applications, you may need to open the Local Unit and/or the Remote Unit.
Unscrew the Philips-type screws at both sides at the bottom of the device. Carefully displace
the lower and upper shells of the case.
4.1 Setup at the Local Unit
After unscrewing and opening the upper shell, please place the device in this orientation: with
the CATx connectors to the right and the electrical connectors to the left.
The main PCBs then will look like this:
Use the diagram to locate jumpers.
Fastening
screw on the
bottom of the
device
Fastening
screw on the
bottom of the
device
JP1, JP2, JP3
Summary of Contents for ACS4422A-R2
Page 4: ...DVI D CATX FIBER KVM EXTENDER 4 ...
Page 49: ...NOTES ...
