APPENDIX B: RACK MOUNT OPTIONS
29
Appendix B: Rack Mount Options
ACS1XXA KVM-Extenders can be mounted into a 19“-Server Rack
using the
DDXI-
Rackmount Kit
.
The
DDXi Rackmount Kit
consists of the following parts:
Mounting instruction:
1.
Align the holes on the base plate with the vacant screw holes on the base of the device.
2.
Fasten the base of the unit –
using only the supplied, short screws
– to the plate of the
mounting kit.
Only use the supplied, short screws, to prevent damages on
the PCB’s
3.
Close the remaining gaps with blanking plates.
Two small blanking plates
Narrow strip
Wide blanking plate
Base plate
M3x5 Screws (14)
Summary of Contents for ACS110
Page 4: ......
Page 40: ...ACS110A ACS211A EXTENDER 38 Power 2 5mm barrel type Pin Signal inner 5V outer GND...
Page 41: ...NOTES...
