Black Box AC1051A User Manual Download Page 7

Page: 7 / 10

Output Commands

The following Output Command formats shall be used:

Oxx=<CR>

: Report an output (x) channel configuration.

Device replies with:

Oxx=yy<CR><LF>

               Parameters:
               x = Output channel (1 - 16)
               y = Input channel assigned to selected output channel (0 = OFF)

Oxx=yy<CR>

: Configure an output (x) channel.

Device replies with:

Oxx=yy<CR><LF>

               Parameters:
               xx = Output channel (1 - 16)
               yy = Input channel assigned to selected output channel (0 = OFF)

Preset Commands:

The following Preset Command formats shall be used:

Pxx=<CR>

: Report a preset (x) configuration.

Device replies with:

Pxx=aa,bb,cc,dd,de,ff,gg,hh, ii, jj, kk,ll,,mm,nn,oo,pp<CR><LF>

               Parameters:
               xx = Preset (0 - 16) – If x = 00, the current (working) configuration
                                                 is reported.
               aa = Output 1 input selection (0 = OFF)
               bb = Output 2 input selection (0 = OFF)
               :
               pp = Output 16 input selection (0 = OFF)

Pxx<CR>

: Saves current (working) configuration as a preset (xx)

configuration.
Device replies with:

Preset xx Stored! <CR><LF>

               Parameters:
               xx = Preset (1 - 16)

CHAPTER 3: Setup and Installation

Pxx=a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p<CR>

: Configures a preset.

Device replies with:

Preset xx Stored! <CR><LF>

If xx = 00 or if x = a recalled preset, the current working preset is
reported as:

P00=a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p<CR><LF>

If xx = a stored preset, the new preset configuration will be saved in
preset memory location xx.

Parameters:
xx = Preset (0 - 16)

             aa = Output 1 input selection (0 = OFF)
              bb = Output 2 input selection (0 = OFF)
             :
             pp = Output 16 input selection (0 = OFF)

Recall Commands:

The following Recall Command formats shall be used:

Rxx<CR>

: Recall preset (xx) and copy to current working preset.

Device replies with:

P00=a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p<CR><LF

Parameters:
aa = Output 1 input selection (0 = OFF)

bb = Output 2 input selection (0 = OFF)
:

pp = Output 16 input selection (0 = OFF)

Clear Working Preset

This command will turn all outputs off immediately.

C<CR>