AC1037A | AC1037A-XMIT | AC1037A-REC
11
Switch Position
EDID Information Source
Loop
From loop-thru monitor
Internal
Default Settings, Generated Internally
AC1037A-XMIT EDID SwITCH SETTINGS
The AC1037A units have a Bandwidth (BW) and Equalizer Setting Dip swicth located on
the front panel. The default factory settings is all switches in the off position. The default
equalizer (EQ) setting is for a short DVI cable, less than 10 feet. The default Bandwidth
(BW) setting is WIDE BW. This should work for most clean, “noise-free” DVI sources.
A narrow bandwidth setting should be used for dirty or noisy DVI sources.
Condition
( 1 ) ( 2 ) ( 3 ) ( 4 )
BW: Wide, EQ: Short Cable (<10 ft.)
Off
Off
Off Off
BW: Medium, EQ: Short Cable(<10 ft.)
On
Off
Off Off
BW: Narrow, EQ: Short Cable (<10 ft.)
Off
On
Off Off
BW: Very Narrow, EQ: Short Cable (<10 ft.)
On
On
Off Off
BW: Wide, EQ: Medium Cable (10-20 ft.)
Off
Off
On Off
BW: Medium, EQ: Medium Cable (10-20 ft.)
On
Off
On Off
BW: Narrow, EQ: Medium Cable (10-20 ft.)
Off
On
On Off
BW: Very Narrow, EQ: Medium Cable (10-20 ft.)
On
On
On Off
BW: Wide, EQ: Long Cable (20-30 ft.)
Off
Off
Off On
BW: Medium, EQ: Long Cable (20-30 ft.)
On
Off
Off On
BW: Narrow, EQ: Long Cable (20-30 ft.)
Off
On
Off On
BW: Very Narrow, EQ: Long Cable (20-30 ft.)
On
On
Off On
BW: Wide, EQ: Very Long Cable (30-45 ft.)
Off
Off
On
On
BW: Medium, EQ: Very Long Cable (30-45 ft.)
On
Off
On
On
BW: Narrow, EQ: Very Long Cable (30-45 ft.)
Off
On
On
On
BW: Very Narrow, EQ: Very Long Cable (30-45 ft.)
On
On
On
On
BANDwIDTH (Bw) & EqUALIzER (Eq) SETTINGS
