CAT5 MULTI VGA SYSTEM
18
Appendix C. Receiver Video Modes
The Cat5 Multi VGA System receivers feature the ability to display five component
RGBHV computer video as well as RGBS, RGsB and full component RGB video.
The transmitter units need no configuration changes.
The AC1005A-R3, AC1006A-R3, AC1015A-R2 feature an auto-sense mode to
determine RGBHV or not is in use. This mode can be overridden if necessary as
shown below:
AUTO SYNC MODES:
JP8 controls sync clamping circuitry and works with the
external switch labeled AUTO CLAMP.
The default sync mode is AUTO CLAMP OFF which will
autosense between RGBHV and non-RGBHV signals.
Turning the External AUTO CLAMP switch ON will set the
sync clamp mode to RGBHV video modes
If non-RGBHV video is desired with AUTO CLAMP ON,
jumper JP8 must be set to IN.
Figure C-1. Auto Sync Modes AC1005A-R3, AC1006A-R3, AC1015A-R2
