Black Box AC1000A-R3, User Manual

Page: 14 / 28

CAT5 MULTI VGA SYSTEM
3.2.2 AC1002A-R3, AC1211A, AC1013A-R2, AC1014A-R2 ADJUSTMENTS
An image utility should be included with the receiver. If it cannot be located, contact
Black Box Technical Support.
NOTE: TURN KNOB SLOWLY DURING ADJUSMENT PROCEDURE. Turning too
fast may result in missing the proper EQ setting resulting in picture loss.
To Reset EQ and Skew values to 0, remove power, push and hold EQ/Skew Knob
in and re-apply power.
1. Push EQ/Skew knob in once so that the R/G/B LED is white (AC1002A-R3,
AC1211A, AC1013A-R2) or all three RGB LED’s are on (AC1014A-R2).
2. Turn the EQ/Skew knob clockwise until the shadow next to the black box just
disappears. The brightness in the white area should be the same as the white area
above and below the black box. The Cable Length LEDs will turn on for indicated
cable distances (AC1014A-R2). Starting from zero feet to 600/1200/2000 may take
some time. Please continue turning the knob for best picture quality.
3. Press and release EQ/Skew knob until the R/G/B LED (AC1002A-R3, AC1211A,
AC1013A-R2) is off, or all three RGB LED’s are off (AC1014A-R2).
Figure 3-7. Image Adjustment Utility.
LEDs for
Skew adjustment
Cable length
LEDs
Adjust
Knob
LEDs for
Skew adjustment Adjust
Knob
AC1002A-R3, AC1211A
AC1013A-R2
EQ Adjust
AC1014A-R2
EQ Adjust
12