11
CHAPTER 4: Using the LCD Panel
FRONT/REAR
Toggles front and rear projection
to match the type of overhead
projector being used.
FINE TUNE
Turn this knob to eliminate uneven
text or streaking in the image. The
adjustment compensates for slight
variances in the PC’s video timing.
Turn the knob slowly until the image
looks best.
TINT
Turn this knob to adjust the
weighting of the red and blue color
tones to suit your own preference.
POWER
(on the right-hand side of the
LCD Panel)
Turns the power on or off.
4.2 How to Use the LCD Panel
Make sure you have everything set
up as described in
Chapter 3
. Then:
1. Power up your computer.
2. Turn on the power switch on
the LCD Panel.
3. Turn on the overhead
projector.
4. Use the CO and –
buttons to get the best-looking
image.
5. Use the FINE TUNE knob to
eliminate uneven text or
streaking.
6. If you like, use the TINT knob
to set the image to a more
reddish or bluish tone.
7. Use the COLOR
and
buttons to choose the best-
looking color mode.
4.3 Using the Remote Control
The signal from the hand-held
remote control is received on the
side of the LCD panel that faces the
projection screen. All the buttons on
the remote control work the same
way as the buttons on the LCD
Panel.
