background image

5

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. 

Use of the power tool

for operations different from those intended could result
in a hazardous situation.

5. Battery tool use and care
a. Ensure the switch is in the off position before

inserting battery pack.

 Inserting the battery pack into

power tools that have the switch on invites accidents.

b. Recharge only with the charger specified by the

manufacturer. 

A charger that is suitable for one type of

battery pack may create a risk of fire when used with
another battery pack.

c. Use power tools only with specifically designated

battery packs. 

Use of any other battery packs may

create a risk of injury and fire.

d. When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.

Shorting the battery terminals together may cause burns
or a fire.

e. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. 

Liquid ejected from

the battery may cause irritation or burns.

6. Service
a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. 

This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for batteries and chargers

Batteries

Never attempt to open for any reason.

Do not expose the battery to water.

Do not store in locations where the temperature may
exceed 40 °C.

Charge only at ambient temperatures between 4 °C and
40 °C.

Charge only using the charger provided with the tool.

When disposing of batteries, follow the instructions given
in the section “Protecting the environment”.

Under extreme conditions, battery leakage may occur.
When you notice liquid on the battery, proceed as follows:
- Carefully wipe the liquid off using a cloth. Avoid skin

contact.

- In case of skin or eye contact, follow the instructions

below.

Warning!

 The battery fluid, a 25-30% solution of potassium

hydroxide, can be harmful. In case of skin contact, immediately
rinse with water. Neutralise with a mild acid such as lemon
juice or vinegar. In case of eye contact, rinse abundantly with
clean water for at least 10 minutes. Consult a physician.

Do not incinerate the battery.

Do not attempt to charge damaged batteries.

Chargers

Use your Black & Decker charger only to charge the battery
in the tool with which it was supplied. Other batteries
could burst, causing personal injury and damage.

Never attempt to charge non-rechargeable batteries.

Have defective cords replaced immediately.

Do not expose the charger to water.

Do not open the charger.

Do not probe the charger.

The charger is intended for indoor use only.

Electrical safety

Your charger is double insulated; therefore no earth
wire is required. Always check that the mains
voltage corresponds to the voltage on the rating
plate. Never attempt to replace the charger unit with
a regular mains plug.

Additional safety instructions for Australia and
New Zealand

This appliance is not intended for use by young or infirm
persons without supervision. Children must be supervised
to ensure they do not play with the appliance.

If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.

Additional safety instructions for drill/screwdrivers

Before drilling into walls, floors or ceilings, check for the
location of wiring and pipes.

Avoid touching the tip of a drill bit just after drilling, as it
may be hot.

Features

This tool includes some or all of the following features.
1. Variable speed switch
2. Forward/reverse slider
3. Mode selector / torque adjustment collar
4. Chuck

Summary of Contents for XTC18BK













Reviews: