Black & Decker X750R, Manual

Page: 7 / 28

Using the self-clean button
The self-clean function must be used before
using the appliance for the first time and then
regularly to remove scale.
• Fill the tank (10) to the maximum filling level
(9).
• Set the temperature control dial (4) to the
max position.
• Plug the appliance in and switch on.
• Allow the appliance to heat up until the
heating light (5) switches off and then on
again.
• Unplug the appliance and hold it horizontally
over the sink.
• Press the self-clean button (7).
Hot water and steam will come out of the vents.
Impurities and scale will be washed away.
• Move the iron backwards and forwards while
this is happening.
• Release the self-clean button.
• Stand the appliance upright on its heel.
• Plug the appliance in and switch on.
• Iron an old cloth or towel to dry the soleplate.
Hints for optimum use
• Sort the articles to be ironed according to the
fabric. Start ironing with the fabrics requiring
the lowest heat setting.
• The appliance can be used as a dry iron
even if there is water in the tank. Do not fill
the tank with water if the appliance is to be
used as a dry iron for an extended period.
• Avoid ironing over zippers, rivets on jeans
etc. as they will scratch the soleplate.
Cleaning and storage
Warning! Before cleaning and storing, unplug
the appliance and allow it to cool down.
• Pour out any remaining water after each use
by tilting the appliance forward.
• Clean the body with a soft damp cloth.
• Wipe scale and other residues off the
soleplate with a damp cloth.
• Store in an upright position. The cord can be
wound around the cord storage (8).
Technical Data
7
ENGLISH
X750R X810R
Voltage 220-240V 220-240V
Frequency 50/60Hz 50/60Hz
Rated Power 1450-1750W 1600-2000W