•
Set the steam control (7) to the no steam
position.
•
Hold the appliance at an angle.
•
Fill the appliance with water using the beaker
provided.
Warning! Never fill above the maximum filling
level indicted on the beaker provided. Normal
tap water can be used, but if you live in a hard
water area the use of distilled water is
recommended. Do not use chemically de-scaled
water.
Filling the spray water tank
In order to be able to use the spray feature, you
will first need to fill the spray water tank with
water.
•
Make sure that the appliance is unplugged.
•
Open the spray water tank cover (4).
•
Hold the appliance at an angle.
•
Fill the appliance with water using the beaker
provided.
•
Close the spray water tank cover (4).
Warning! Never fill above the maximum filling
level indicted on the beaker provided. Normal
tap water can be used, but if you live in a hard
water area the use of distilled water is
recommended.
Do not use chemically de-scaled water.
Use
Warning! Do not leave the appliance
unattended while it is connected to the power
supply and during the cool down period.
Temperature setting
The required temperature setting depends on
the garment fabric.
•
Adjust the temperature control dial (8) to the
required setting:
-
•
Synthetics
-
••
Silk/wool
-
•••
Cotton/Linen
If you are unsure of the fiber content of a
garment: start with a low temperature setting and
test on a small area (seam or inside hem). If
wrinkles remain, gradually increase the heat
setting until you find the optimum setting.
Using as a dry iron
•
Stand the appliance on its heel rest (12).
•
Plug the appliance in and switch on.
•
Set the steam control (7) to the no steam
position.
•
Adjust the temperature control dial (8) to the
required setting.
The heating light (10) will switch off when the
appliance has reached the required temperature.
Using as a steam iron
•
Fill the water steam tank as described above.
•
Stand the appliance on its heel rest (12).
•
Adjust the temperature control dial (8) to the
required steam setting.
The heating light (10) will switch on. When the
heating light switches off, the iron will be ready
for use as a steam iron.
The heating light will regularly switch on and off
whilst ironing.
•
To create steam, set the steam control (7) to
the steam position.
•
Plug the appliance in and switch on.
Using the spray button
The spray feature can be used at any
temperature setting when either steam or dry
ironing.
•
Make sure that there is water in the spray
water tank.
•
Press the spray button (2) several times to
activate the pump while you are ironing.
6
ENGLISH
