Black & Decker SM250, Manual

Page: 5 / 32

5
ENGLISH
• To avoid the risk of electric shock, do not
immerse the cord, plug or motor unit in
water or other liquid.
• Check that the supply voltage shown on
the rating plate of the appliance matches
that of your electrical system. Any
connection error will invalidate the
guarantee.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug
• Connect the brown lead to the live
terminal of the new plug
• Connect the blue lead to the neutral
terminal
• If the product is class I (earthed),
connect the green/yellow lead to the
earth terminal
Warning! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth
terminal
• Follow the fitting instructions supplied
with good quality plugs
• Any replacement fuse must be of the
same rating as the original fuse supplied
with the product
Assembly
The appliance should be
disconnected from the mains
supply before assembly.
1. Wash all detachable parts (see chapter
‘Maintenance and cleaning’).
2. Place the bowl (10) onto the chopper
body (13).
3. Lock the bowl in place by turning it
anti-clockwise.
4. Place the stirrer (9) onto the spindle in
the centre of the bowl (10)
Extra care should be taken when
handling or assembling the blades.
5. Fit a blade (5, 6, 7 or 8) into the blade
holder (4).
6. Insert the flat side of the blade (5, 6, 7 or
8) into the centre of the blade holder (4)