7
8
9
10
7 VALVE BODY ATTACHMENT
From above sink, insert Valve Body (
7A
) through Mounting Holes (
7B
). The
HOT valve, labeled with Red Tag (
7C
), should be positioned to the left side
of the spout.
8 VALVE BODY INSTALLATION
From underneath sink, place Mounting Washer (
8B
) onto Valve Shank (
8A
) and
tighten with Mounting Nut (
8C
).
9 SECURING VALVE BODY
From underneath, tighten Mounting Nut (
9A
) by using Installation Tool (
9B
). For
better leverage, use a Screwdriver (
9C
), insert it through Hole (
9D
) and tighten
the Mounting Nut (
9A
) until Valve (
9E
) is fi rmly secured to sink.
9E
9E
10 HOSE CONNECTION TO SPOUT BODY
From underneath sink, push the Center Connector (
10A
) onto receiving Tube
(
10B
), until unable to push any further. Pull down on the quick connect housing
(
10A
). If the housing and the Inner Collet (
10C
) separate slightly but do not pull
off the receiving Tube (
10B
), the connection is secure.
3
ENGLISH
7A
7A
7B
7B
7C
8A
8B
8C
9A
9D
9B
9C
9E
9E
9A
9A
9E
10A
10B
10B
10A
10B
10A
10A
10C
