Black & Decker Power Solutions GSC500, Manual

Page: 6 / 92

6
ENGLISH
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained power
tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to
be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
5. Battery tool use and care
a. Ensure the switch is in the off position before
inserting battery pack.
Inserting the battery pack into power tools that have the
switch on invites accidents.
b. Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type of battery pack may
create a risk of fire when used with another battery pack.
c. Use power tools only with specifically designated
battery packs.
Use of any other battery packs may create a risk of injury
and fire.
d. When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
e. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
6. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Additional safety instructions
Warning!

Read all instructions and safety precautions for equipment
and spray material before operation any equipment.

Comply with all appropriate local, state and national codes
governing ventilation, fire prevention and operation.

Keep sprayer out of reach of children.

Hearing protection is recommended for extended use.

Use eye protection to keep particles out of eyes.
Hazardous vapors
Insecticides and other materials may be harmful if inhaled
causing severe nausea, fainting or poisoning.
a. Use a respirator or mask whenever there is a chance that
vapors may be inhaled. Read all instructions with the
spray material and mask to ensure that it will provide the
necessary protection against the inhalation of harmful
vapors.
Additional safety instructions for sprayers
The following warning symbols are found on the appliance:
Do not expose the appliance to rain or high humidity.
Read the manual prior to operation.
Do not dispose of in fire.
Keep bystanders away.
Wear safety glasses or goggles when operating this
tool.
Wear a respirator or mask.
Read the manual prior to operation.
Warning!

Before using any pesticide or other spray materials in this
sprayer, read the label on its original container thoroughly
and follow its directions.