background image

• EXTENSION CORDS.

Make sure your extension cord is in good condition. When using an extension

cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord
will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the
correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next
heavier gage. The smaller the gage number, the heavier the cord.

SAFETY GUIDELINES / DEFINITIONS

DANGER:

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious

injury.

WARNING:

Indicates a potentially hazardous situation which, if not  avoided, could result in death or serious

injury.

CAUTION: 

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate

injury.

CAUTION:

Used without the safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

RISK OF UNSAFE OPERATION.

When using tools or equipment, basic safety precautions should always

be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of
tools or equipment could result in serious injury and property damage. There are certain applications for
which tools and equipment are designed. Black & Decker strongly recommends that this product NOT be
modified and/or used for any application other than for which it was designed. Read and understand all
warnings and operating instructions before using any tool or equipment.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

This product or its power cord contains lead, a chemical known to the State of California to

cause cancer and birth defect or other reproductive harm. Wash hands after handling.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK:

• Do not connect to AC distribution wiring.

• Do not make any electrical connections or disconnections in areas designated as IGNITION PROTECTED.
This includes DC cigarette lighter type plug connection or airplane adapter. This unit is NOT approved for
ignition protected areas.

• NEVER immerse the unit in water or any other liquid, or use when wet.

• Do not insert foreign objects into the AC outlet or the USB outlet.

WARNING: TO REDUCE THE RISK OF FIRE:

• Do not operate near flammable materials, fumes or gases.

• DO NOT expose to extreme heat or flames. 

CAUTION: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE: 

• Remove appliance plug from outlet before working on the appliance.

• DO NOT attempt to connect or set up the unit or its components while operating your vehicle. Not
paying attention to the road may result in a serious accident.

Minimum Gage for Cord Sets

Volts 

Total Length of Cord in Feet

120V

0-25

26-50

51-100

101-150

(0-7.6m)

(7.6-15.2m)

(15.2-30.4m)

(30.4-45.7m)

240V

0-50

51-100

101-200

201-300

(0-15.2m) (15.2-30.4m)

(30.4-60.9m)

(60.9-91.4m)

Ampere Rating

More

Not more

American Wire Gage

Than

Than

0   -

6

18

16

16

14

6      -

10

18

16

14

12

10  -

12

16

16

14

12

12 -

16

14

12

Not Recommended

2

PI100AB english.qxp  12/18/07  10:47 AM  Page 2

Summary of Contents for PI100AB









Reviews: